Impact Grain Mill FAQs

If you have questions about using your NutriMill Impact Grain Mill, this FAQ guide provides answers to common issues, troubleshooting tips, and general information to help you get the best performance from your mill.

1. Why is My Grain Coming Out So Coarse?

If your flour is too coarse, adjust the feed rate:

Turn the feed rate knob slightly until the grain begins to feed—this allows for finer milling.
Experiment with different settings to find the best texture for your needs.

2. Why Won’t My Grain Feed into the Mill?

Some grains require a higher feed rate setting:

Larger grains need a higher setting to feed properly.
For example, most wheat will not begin feeding until the feed rate is set to 2 or 3.

3. What is the Warranty for the NutriMill Impact Grain Mill?

The NutriMill Impact Grain Mill includes:

5-year warranty covering defects in materials and workmanship.
Limited lifetime warranty on the motor and milling heads.

Defective products will be repaired or replaced at NutriMill’s discretion upon receiving the defective unit.

4. Why Won’t the Hopper Attach?

If the hopper is not attaching properly:

The hopper only fits in one direction.
Align the large tab with the large slot to ensure it locks into place.

5. Why Won’t My Mill Turn On?

If the mill does not start, check the following:

Ensure the hopper is fully inserted and locked into place.
Confirm the power cord is securely plugged in.
Make sure the canister is locked in place before turning on the mill.

6. Is the NutriMill Impact Grain Mill Dishwasher Safe?

Dishwasher Safe Parts (Top Rack Recommended):
- Hopper
- Lid
- Canister
- Cyclo Cup
- Filter Holder
Hand Wash Only:
- Filter
Spot Clean Only:
- Milling Base—do not submerge in water.

Always ensure all parts are completely dry before milling to prevent damage.