Cleaning & Maintaining Your NutriMill Artiste Stand MixerUpdated a month ago

Proper cleaning and maintenance of your NutriMill Artiste Stand Mixer will ensure optimal performance and extend its lifespan. Follow these steps to keep your mixer in top condition after every use.

1. Cleaning After Each Use

To prevent ingredient buildup and maintain peak performance, follow these cleaning steps after every mixing session:

• Unplug the mixer before cleaning.
• Remove all attachments, including the dough hook, wire whips, splash cover, and drive shaft.
• Remove the drive shaft from the mixing bowl before washing.
• Wash the mixing bowl, lid, and attachments in warm, soapy water or place them in the dishwasher, except for non-dishwasher-safe parts.

Dishwasher Safe Parts (Top Rack Recommended):

• Plastic mixing bowl
• Lid
• Wire whips

Hand Wash Only:

• Dough hook
• Metal whip drive
• Drive shaft

Spot Clean Only:

• Motor base—wipe with a damp cloth, do not submerge in water.

• Ensure all parts are completely dry before reassembling.

2. Deep Cleaning (Every Few Months or As Needed)

For a more thorough clean, follow these steps:

Step 1: Clean the Mixer Base

• Use a damp cloth to wipe down the motor base and speed control dial.
• Do not use water or harsh cleaning agents on the motor housing.

Step 2: Clean the High-Torque Drive Shaft

• Use a cotton swab to remove flour or residue from the high-torque drive shaft.
• Apply a small amount of food-grade oil to keep it running smoothly.

Step 3: Clean the Dough Hook and Whips

• Remove any dried dough or batter before washing.
• If the wire whips are clogged, soak them in warm, soapy water before washing.

Step 4: Inspect and Clean the Bowl Drive Mechanism

• Remove the bowl and check the bowl drive shaft for any buildup.
• Wipe the shaft clean and ensure it is free of any trapped flour or dough.

3. Preventative Maintenance for Long-Term Performance

• Always remove the drive shaft before washing the bowl in the dishwasher.
• Do not submerge the motor base in water—only wipe it clean with a damp cloth.
• Ensure all parts are completely dry before reassembling and storing.
• Store the mixer in a dry location to prevent moisture buildup.
• Periodically lubricate the high-torque drive shaft with a small amount of food-grade oil.

4. Signs Your Mixer Needs Maintenance

If you notice any of the following issues when using your mixer, it may need cleaning or maintenance before use:

• The motor makes unusual noises when running.
• Attachments aren't fitting or locking properly.
• The drive shaft is stiff or difficult to insert into the bowl.

If you experience any of these issues, perform a deep cleaning and inspect for any worn-out parts. For further assistance, please contact customer service

By following these cleaning and maintenance steps, you can ensure that your NutriMill Artiste Stand Mixer remains in excellent condition for years to come.