Cleaning & Maintaining Your Impact Grain MillUpdated a month ago

Proper cleaning and maintenance of your NutriMill Impact Grain Mill will ensure optimal performance and extend its lifespan. Follow these best practices to keep your mill running efficiently for years to come.

1. Cleaning After Each Use

To prevent flour buildup and maintain peak performance, follow these steps after every milling session:

• Run the mill for a few extra seconds after milling to clear any remaining flour from the chamber.
• Tap the canister lid before removing it to minimize flour dust.
• Brush away excess flour from the flour outlet and inside the canister using a dry cloth or soft brush.
• Remove and clean the filter in the canister lid by tapping out excess flour.

2. Deep Cleaning (Every Few Months or As Needed)

For a more thorough clean, follow these steps:

Step 1: Mill White Rice to Clean the Milling Chamber

• Run ¼ cup of white rice through the mill on a medium-coarse setting.
• This helps remove flour residue and any lingering moisture buildup.
• Discard the rice flour and wipe down the canister and lid.

Step 2: Clean the Flour Canister & Lid

• Wipe the canister and lid with a dry or slightly damp cloth.
• Do not use water directly inside the mill.

Step 3: Inspect and Clean the Air Filter

• The filter inside the canister lid helps trap flour dust.
• Tap it out over a trash can to remove excess flour.
• If clogged, replace the filter for best performance.

3. Preventative Maintenance Tips

• Do not mill oily or high-moisture grains – These can gum up the milling heads and reduce efficiency.
• Ensure the flour spout remains clear – If clogged, use a brush or compressed air to remove flour buildup.
• Store the mill in a dry location – Keep it away from moisture to prevent damage.
• Do not submerge or wash any part of the mill with water – Only wipe with a dry cloth.

4. Signs That Your Mill Needs Cleaning

• Flour output is slower or uneven.
• A burning smell or excessive noise occurs while milling.
• Flour contains residue from previous batches.
• Flour dust is leaking from the canister lid.

If you experience any of these issues, perform a deep cleaning to restore performance.

By following these cleaning and maintenance steps, you can ensure that your NutriMill Impact Grain Mill remains in excellent condition for years to come.